Light fixtures

To be sure, we have a large arsenal to combat the darkness

Select filter
Filters Delete filters
The economical equivalent is simply to compare the consumption of a light source with a conventional tungsten filament bulb with the same luminous flux.
Economical equivalent
  • W
    W
Power input is a physical quantity that expresses the amount of energy consumed by an appliance per time unit. The smaller the value, the more economical the product, but also less powerful.
Power input
  • W
    W
Luminous flux. It’s denoted by the letter Φ and the unit is lumen (lm). Indicates the light energy that the source emits in 1 second. Thus, it is a form of power. The higher the value, the more light the light source emits.
Luminous flux
  • lm
    lm
Power





A timer is a feature that allows the product to run at a selected time interval. In other words, it takes care of the automatic switching off and in some cases of switching the device on.
Timer

Motion sensors are based on the motion detection principle. They will protect your property from unwanted visitors and turn on a light wherever you go.
Motion sensor

The twilight sensor is basically a photodiode that turns the lighting on or off automatically according to the selected light intensity level. It is therefore not necessary to set the switching time, everything switches according to the outdoor light intensity. For example, it’s ideal for night lights.
Light sensor

Off

The parameter determines whether the device is equipped with a USB interface (connector). Very useful for charging various devices.
USB output

Wireless charging uses a simple principle of electromagnetic induction. When a compatible device (such as a mobile phone) is put on it, charging starts automatically. For phones not supporting this standard, you can purchase a special module or cover that allows wireless charging.
Wireless charging

Halogen, classic but only some LED lamps can normally be dimmed with common types of dimmers. The dimmability parameter means that the light source can be dimmed with conventional dimmers.
Dimmability


The degree of protection (IP) indicates the resistance of electrical equipment to the ingress of foreign bodies and the ingress of liquids, especially water. It is expressed in the so-called IP code, which consists of the characters "IP" followed by two digits: the first digit indicates protection against dangerous contact and against the ingression of foreign objects, the second digit indicates the degree of protection against water ingression.
Protection against water and dust



Use


Height
  • cm
    cm
The operating bulb voltage at which the bulb shows the specified luminous flux parameter. Conventional light sources are either designed for 230V mains voltage or are low-voltage (e.g. 12V)
Voltage





Colour temperature, in professional terms the temperature of chromaticity, is the expression of the colour of light emitted by a luminary. It is denoted by the letter K - Kelvin. In general, the lower the Kelvin value, the warmer and darker the light is. E.g. the wax candle light is 1,900 Kelvin. In contrast, a fluorescent lamp can have about 6,000K.
Color temperature
  • K
    K
Depth
  • cm
    cm
The service life of modern light sources is many times higher compared with tungsten filament light sources. The value expresses the number of hours that the light source is able to emit without appreciable loss of luminous flux.
Lifetime
  • h
    h
Width
  • cm
    cm
Shape




New
Ending item
LED reflector with PIR sensor
10 W
10 W, cold white, 800 lm, 230 V, for inner/outdoor use, IP65
New
Ending item
Fitted luminaire with PIR E27
Surface mounting wall lamp for E27 bulb with pir sensor, outdoor use, dim. 260x230 mm
New
Ending item
Fitted luminaire for T8 tube
Surface mounting wall lamp for E27 bulb with pir sensor, outdoor use, dim. 260x230 mm
New
Ending item
LED reflector with PIR sensor
30 W
30 W, cold white, 2400 lm, 230 V, for inner/outdoor use/IP65
New
Ending item
LED reflector with PIR sensor
50 W
50 W, cold white, 4000 lm, 230 V, for inner/outdoor use, IP65
New
Ending item
Fitted luminaire for T8 tube
Tubular dustproof luminaire 120 cm for T8 tubes, in/outdoor use, dim. 1265x112x63 mm
New
Ending item
Reflector cable junction
An accessory for connection of the rsl floodlight to the mains. 
New
Ending item
Fitted luminaire for T8 tube
Tubular luminaire 60 cm for T8 tubes, indoor use, dim. 680x113x63 mm
New
Ending item
Fitted luminaire for T8 tube
Tubular luminaire 120 cm for T8 tubes, indoor use, dim. 1265x112x63 mm
New
Ending item
Fitted luminaire for T8 tube
Tubular luminaire 150 cm for T8 tubes, indoor use, dim. 1536x74x43 mm
New
Ending item
Connection cable for T8 lumina
Connection cable for inner tubular luminaires, lenght 300 mm
New
Ending item
E27 fitted luminaire
Surface mounting wall lamp for E27 bulb, outdoor use, dim. 160x215x310 mm
1234567